Displays the waveform of sampler module. This module is voluntarily separated from the sampler. It allows more complex routing possibilities.
There are 3 zones of possible actions
Zone 1: set/modify the cursor position Zone 2: set/modify the loop selector position Zone 3: marker zone: create (double click), delete (double click on an existing marker), move.
Sets or displays the current reading position.
Start reading position: the file is read between the start and the end position.
End reading position: the file is read between the start and the end position.
Waveform array to display (see waveform parameter in the sampler module).
Indicates the new cursor position. The cursor position can be set by clicking on the top of the wavedisplay (zone1). This parameter can be connected to the pos inlet of the sampler module.
Second waveform array to display .
Get or set the total number of markers created. Can be used to clear the markers (set it to 0).
Array which contains the markers position: the length of the array is the total number of markers. Each element is the value of their respective position (from 0..100%).
Button to insert a new marker at the current position.
When the value changes, goes directly to Nth marker. If the value is -1, does nothing.